Vello shutterboss version ii, User Manual, Page: 14 / 20

14
LONG – Exposure Time
LONG sets the exposure time for each
shot. This can be much longer than the
camera’s available shutter speeds. You can
select exposure times from 1 second to 99
hours 59 minutes 59 seconds, in one-second
increments. The confirmation LED will blink
every second during a long exposure.
Note: For long exposures (1 second and
longer), set your camera to Bulb mode,
and then set the exposure time on the
ShutterBoss. Use the camera to control
exposure time when shutter speeds are
faster than 1 second.
1.
Set your camera’s exposure mode to Bulb.
2. Press the / arrows to position the
cursor beneath LONG.
3.
Press the
SET
button to change the
exposure time settings. The time
increments will blink.
4. Use the / arrows to move between
hours, minutes, and seconds.
5.
Use the / arrows to change the time
increments.
6. Press the SET button to confirm.
7.
Press
TIMER START/STOP
to begin the
timer.
Hours
Cursor
Minutes Seconds
SELF LONG INTV No. BEEP