Vello IR-STV, User Manual

Page: 1 / 9

S
2S
ENTER
MENU
DISP
PRINT
IR
Remote
Display
Control
for Sony
Introduction
Thank you for choosing Vello.
Congratulations on the purchase of your Vello IR-STV infrared remote
control. This wireless remote lets you take photos, shoot video, print images,
and control playback on your Sony DSLR or NEX camera from up to fifteen
feet away. The Vello IR-STV is especially useful for preventing camera shake
during long exposures and for taking self-portraits. It can also be used to
trigger a remote camera when shooting events.
Precautions
Before using your Vello IR-STV infrared remote control, please read the
following safety notices carefully and thoroughly to ensure safe use and to
help prevent damage to your remote control or injury to yourself or others.
• Remove the battery from this product before long-term storage in order
to prevent it from leaking corrosive liquids.
• This product is not water resistant. Keep it away from rain, snow,
humidity, and general moisture.
• Do not clean this product with agents containing corrosive or flammable
substances such as paint thinner, benzene, or nail polish remover.
• Strong light and weak batteries may adversely affect the transmission of
the infrared signal.
• Dispose of used batteries properly. Never heat them or throw them into a
fire, as this can cause the batteries to leak corrosive liquids, generate heat,
or explode.
Overview
* These controls perform the same function as their on-camera equivalents.
Note: Except for the S, S2, and Video buttons, the buttons will work only
when the camera is plugged into a TV.
Using Your IR-STV as a Remote Trigger
The Vello IR-STV can trigger your camera’s shutter from up to fifteen feet
away. To use your IR-STV as a remote trigger, turn on your camera and
follow these steps:
1. Remove the plastic separator from the battery.
2. Set up your shot and make sure your camera is in focus.
3. Set your camera for remote triggering. For more information about the
remote triggering feature, consult your camera’s manual.
4. Aim the remote at the camera’s infrared sensor and press the S button to
release the shutter. To release the shutter with a two-second delay, press
the 2S button.
The Vello IR-STV can trigger video shooting on compatible Sony cameras. To
start shooting video, press the Video button. To stop shooting video, press
the Video button again.
Note: Please see your camera’s user manual for complete instructions and
supported features.
WIRELESS CAMERA
ACTIVATION AND
PLAYBACK
INFRARED
REMOTE
CONTROL
U
SE
R
M
AN
U
AL
www.vellogear.com
© Copyright 20 1 3 Gradus Group
Important! Because infrared technology requires line-of-sight communica-
tion between the two devices, make sure there are no obstructions
between the remote and your camera’s sensor.
Playback, Slideshow, and Printing
You can use your Vello IR-STV remote to wirelessly control playback on
your Sony camera when the camera is plugged into your TV. Most of the
buttons on the IR-STV will correspond with the buttons on your Sony
camera.
To begin a slideshow, press the slideshow button on the remote. Use the
right or left buttons on the multi-selector to display the next or previous
image, and use the ENTER button for play and pause.
To print images while viewing them on the TV, follow these steps:
1. Use an HDMI cable to connect your camera to an HDTV.
2. Plug your camera into a PictBridge-compliant printer.
3. Display the image you want to print, and then press the PRINT button on
the remote control.
For more information about the playback and printing features, consult your
camera’s manual.
Replacing the Battery
The Vello IR-STV is powered by a 3 V CR2025
lithium battery. To replace the battery, follow
these steps:
1. Use your fingernail to pry the battery tray
out of the remote.
2. Remove the old battery and replace it with a new one, making sure the
side marked with a plus sign (+) is facing up.
3. Push the battery tray back into the remote so it locks in place.
Specifications
• Operating distance: up to
1
5 ft. (4.6 m)
• Operating temperatures: 32°F–
1
04°F (0°C–40°C)
• Storage temperatures: -4°F–
1
40°F (-20°C–60°C)
• Battery type: 3 V CR2025 lithium
• Dimensions: 3.6 ×
1
.6 × 0.4 in. (90.3 × 40.9 ×
1
0.8 mm)
• Weight: 0.8 oz. (22.6 g)
Compatible Cameras
Sony
®
DSLR A230 / A330/ A380 / A390 / A500 / A550 / A560 / A580
DSLR A700 / A850 / A900 / SLT: A33 / 55 / A57 / A65 / A77 / NEX: 5
5n / 6 / 7
Warranty
Vello provides a limited warranty that this product is free from defects in
materials and workmanship to the original purchaser under normal use for a
period of one (
1
) year from the original purchase date or thirty (30) days
after replacement whichever occurs later. Our responsibility with respect to
this limited warranty shall be limited solely to repair or replacement, at its
option, of any product which fails during normal consumer use. To obtain
warranty coverage during the Warranty Period, contact your place of
purchase (“Seller”) to obtain a return merchandise authorization (“RMA”)
number, and return to Seller the defective product along with proof of
purchase and the RMA number. This warranty does not extend to damage or
failure which results from misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
VELLO MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specific legal
rights, and you may also have additional rights which vary from state to state.
Rotate*
Multi-Selector
Shutter Release*
Index*
Slideshow
Begins a slideshow
of images.
Enlarge
Enlarges the
selected image.
Shrink
Shrinks the
selected image.
Display*
Delete*
Menu*
Playback*
Print
Prints the selected
image on a connected
PictBridge-compliant
printer.
Shutter Two-
Second Delayed
Releases the shutter
after a two-second
delay.
Histogram
Displays histogram
onscreen.
IR-STV
CR2025
OPEN
Video Button:
Starts and stops
video shooting.
S
2S
ENTER
MENU
DISP
PRINT
IR
Remote
Display
Control
for Sony
Introduction
Thank you for choosing Vello.
Congratulations on the purchase of your Vello IR-STV infrared remote
control. This wireless remote lets you take photos, shoot video, print images,
and control playback on your Sony DSLR or NEX camera from up to fifteen
feet away. The Vello IR-STV is especially useful for preventing camera shake
during long exposures and for taking self-portraits. It can also be used to
trigger a remote camera when shooting events.
Precautions
Before using your Vello IR-STV infrared remote control, please read the
following safety notices carefully and thoroughly to ensure safe use and to
help prevent damage to your remote control or injury to yourself or others.
• Remove the battery from this product before long-term storage in order
to prevent it from leaking corrosive liquids.
• This product is not water resistant. Keep it away from rain, snow,
humidity, and general moisture.
• Do not clean this product with agents containing corrosive or flammable
substances such as paint thinner, benzene, or nail polish remover.
• Strong light and weak batteries may adversely affect the transmission of
the infrared signal.
• Dispose of used batteries properly. Never heat them or throw them into a
fire, as this can cause the batteries to leak corrosive liquids, generate heat,
or explode.
Overview
* These controls perform the same function as their on-camera equivalents.
Note: Except for the S, S2, and Video buttons, the buttons will work only
when the camera is plugged into a TV.
Using Your IR-STV as a Remote Trigger
The Vello IR-STV can trigger your camera’s shutter from up to fifteen feet
away. To use your IR-STV as a remote trigger, turn on your camera and
follow these steps:
1. Remove the plastic separator from the battery.
2. Set up your shot and make sure your camera is in focus.
3. Set your camera for remote triggering. For more information about the
remote triggering feature, consult your camera’s manual.
4. Aim the remote at the camera’s infrared sensor and press the S button to
release the shutter. To release the shutter with a two-second delay, press
the 2S button.
The Vello IR-STV can trigger video shooting on compatible Sony cameras. To
start shooting video, press the Video button. To stop shooting video, press
the Video button again.
Note: Please see your camera’s user manual for complete instructions and
supported features.
WIRELESS CAMERA
ACTIVATION AND
PLAYBACK
INFRARED
REMOTE
CONTROL
U
SE
R
M
AN
U
AL
www.vellogear.com
© Copyright 20 1 3 Gradus Group
Important! Because infrared technology requires line-of-sight communica-
tion between the two devices, make sure there are no obstructions
between the remote and your camera’s sensor.
Playback, Slideshow, and Printing
You can use your Vello IR-STV remote to wirelessly control playback on
your Sony camera when the camera is plugged into your TV. Most of the
buttons on the IR-STV will correspond with the buttons on your Sony
camera.
To begin a slideshow, press the slideshow button on the remote. Use the
right or left buttons on the multi-selector to display the next or previous
image, and use the ENTER button for play and pause.
To print images while viewing them on the TV, follow these steps:
1. Use an HDMI cable to connect your camera to an HDTV.
2. Plug your camera into a PictBridge-compliant printer.
3. Display the image you want to print, and then press the PRINT button on
the remote control.
For more information about the playback and printing features, consult your
camera’s manual.
Replacing the Battery
The Vello IR-STV is powered by a 3 V CR2025
lithium battery. To replace the battery, follow
these steps:
1. Use your fingernail to pry the battery tray
out of the remote.
2. Remove the old battery and replace it with a new one, making sure the
side marked with a plus sign (+) is facing up.
3. Push the battery tray back into the remote so it locks in place.
Specifications
• Operating distance: up to
1
5 ft. (4.6 m)
• Operating temperatures: 32°F–
1
04°F (0°C–40°C)
• Storage temperatures: -4°F–
1
40°F (-20°C–60°C)
• Battery type: 3 V CR2025 lithium
• Dimensions: 3.6 ×
1
.6 × 0.4 in. (90.3 × 40.9 ×
1
0.8 mm)
• Weight: 0.8 oz. (22.6 g)
Compatible Cameras
Sony
®
DSLR A230 / A330/ A380 / A390 / A500 / A550 / A560 / A580
DSLR A700 / A850 / A900 / SLT: A33 / 55 / A57 / A65 / A77 / NEX: 5
5n / 6 / 7
Warranty
Vello provides a limited warranty that this product is free from defects in
materials and workmanship to the original purchaser under normal use for a
period of one (
1
) year from the original purchase date or thirty (30) days
after replacement whichever occurs later. Our responsibility with respect to
this limited warranty shall be limited solely to repair or replacement, at its
option, of any product which fails during normal consumer use. To obtain
warranty coverage during the Warranty Period, contact your place of
purchase (“Seller”) to obtain a return merchandise authorization (“RMA”)
number, and return to Seller the defective product along with proof of
purchase and the RMA number. This warranty does not extend to damage or
failure which results from misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
VELLO MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specific legal
rights, and you may also have additional rights which vary from state to state.
Rotate*
Multi-Selector
Shutter Release*
Index*
Slideshow
Begins a slideshow
of images.
Enlarge
Enlarges the
selected image.
Shrink
Shrinks the
selected image.
Display*
Delete*
Menu*
Playback*
Print
Prints the selected
image on a connected
PictBridge-compliant
printer.
Shutter Two-
Second Delayed
Releases the shutter
after a two-second
delay.
Histogram
Displays histogram
onscreen.
IR-STV
CR2025
OPEN
Video Button:
Starts and stops
video shooting.
S 2S
ENTER
MENU
DISP
PRINT
IR
Remote
Display
Control
for Sony
Introduction
Thank you for choosing Vello.
Congratulations on the purchase of your Vello IR-STV infrared remote
control. This wireless remote lets you take photos, shoot video, print images,
and control playback on your Sony DSLR or NEX camera from up to fifteen
feet away. The Vello IR-STV is especially useful for preventing camera shake
during long exposures and for taking self-portraits. It can also be used to
trigger a remote camera when shooting events.
Precautions
Before using your Vello IR-STV infrared remote control, please read the
following safety notices carefully and thoroughly to ensure safe use and to
help prevent damage to your remote control or injury to yourself or others.
• Remove the battery from this product before long-term storage in order
to prevent it from leaking corrosive liquids.
• This product is not water resistant. Keep it away from rain, snow,
humidity, and general moisture.
• Do not clean this product with agents containing corrosive or flammable
substances such as paint thinner, benzene, or nail polish remover.
• Strong light and weak batteries may adversely affect the transmission of
the infrared signal.
• Dispose of used batteries properly. Never heat them or throw them into a
fire, as this can cause the batteries to leak corrosive liquids, generate heat,
or explode.
Overview
* These controls perform the same function as their on-camera equivalents.
Note:
Except for the S, S2, and Video buttons, the buttons will work only
when the camera is plugged into a TV.
Using Your IR-STV as a Remote Trigger
The Vello IR-STV can trigger your camera’s shutter from up to fifteen feet
away. To use your IR-STV as a remote trigger, turn on your camera and
follow these steps:
1. Remove the plastic separator from the battery.
2. Set up your shot and make sure your camera is in focus.
3. Set your camera for remote triggering. For more information about the
remote triggering feature, consult your camera’s manual.
4. Aim the remote at the camera’s infrared sensor and press the S button to
release the shutter. To release the shutter with a two-second delay, press
the 2S button.
The Vello IR-STV can trigger video shooting on compatible Sony cameras. To
start shooting video, press the Video button. To stop shooting video, press
the Video button again.
Note:
Please see your camera’s user manual for complete instructions and
supported features.
WIRELESS CAMERA
ACTIVATION AND
PLAYBACK
INFRARED
REMOTE
CONTROL
U
SE
R
M
AN
U
AL
www.vellogear.com
© Copyright 20 1 3 Gradus Group
Important! Because infrared technology requires line-of-sight communica-
tion between the two devices, make sure there are no obstructions
between the remote and your camera’s sensor.
Playback, Slideshow, and Printing
You can use your Vello IR-STV remote to wirelessly control playback on
your Sony camera when the camera is plugged into your TV. Most of the
buttons on the IR-STV will correspond with the buttons on your Sony
camera.
To begin a slideshow, press the slideshow button on the remote. Use the
right or left buttons on the multi-selector to display the next or previous
image, and use the ENTER button for play and pause.
To print images while viewing them on the TV, follow these steps:
1. Use an HDMI cable to connect your camera to an HDTV.
2. Plug your camera into a PictBridge-compliant printer.
3. Display the image you want to print, and then press the PRINT button on
the remote control.
For more information about the playback and printing features, consult your
camera’s manual.
Replacing the Battery
The Vello IR-STV is powered by a 3 V CR2025
lithium battery. To replace the battery, follow
these steps:
1. Use your fingernail to pry the battery tray
out of the remote.
2. Remove the old battery and replace it with a new one, making sure the
side marked with a plus sign (+) is facing up.
3. Push the battery tray back into the remote so it locks in place.
Specifications
• Operating distance: up to
1
5 ft. (4.6 m)
• Operating temperatures: 32°F–
1
04°F (0°C–40°C)
• Storage temperatures: -4°F–
1
40°F (-20°C–60°C)
• Battery type: 3 V CR2025 lithium
• Dimensions: 3.6 ×
1
.6 × 0.4 in. (90.3 × 40.9 ×
1
0.8 mm)
• Weight: 0.8 oz. (22.6 g)
Compatible Cameras
Sony
®
DSLR A230 / A330/ A380 / A390 / A500 / A550 / A560 / A580
DSLR A700 / A850 / A900 / SLT: A33 / 55 / A57 / A65 / A77 / NEX: 5
5n / 6 / 7
Warranty
Vello provides a limited warranty that this product is free from defects in
materials and workmanship to the original purchaser under normal use for a
period of one (
1
) year from the original purchase date or thirty (30) days
after replacement whichever occurs later. Our responsibility with respect to
this limited warranty shall be limited solely to repair or replacement, at its
option, of any product which fails during normal consumer use. To obtain
warranty coverage during the Warranty Period, contact your place of
purchase (“Seller”) to obtain a return merchandise authorization (“RMA”)
number, and return to Seller the defective product along with proof of
purchase and the RMA number. This warranty does not extend to damage or
failure which results from misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
VELLO MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specific legal
rights, and you may also have additional rights which vary from state to state.
Rotate*
Multi-Selector
Shutter Release*
Index*
Slideshow
Begins a slideshow
of images.
Enlarge
Enlarges the
selected image.
Shrink
Shrinks the
selected image.
Display*
Delete*
Menu*
Playback*
Print
Prints the selected
image on a connected
PictBridge-compliant
printer.
Shutter Two-
Second Delayed
Releases the shutter
after a two-second
delay.
Histogram
Displays histogram
onscreen.
IR-STV
CR2025
OPEN
Video Button:
Starts and stops
video shooting.