Manual Flash Mode
Power Setting
Flash Group
set to Off
24
Set a Flash Group to Manual mode
Using a Transceiver in Master mode:
1. Set your compatible TTL hot-shoe flash
to TTL mode.
2. From the Transceiver's TTL Screen,
press the
Select
button, and the screen
will begin to blink.
3. Press the desired group button (A, B,
or C) twice to set that group to manual
mode.
4. Use the
+
and
−
buttons to adjust the
manual power setting.
5. Press
Select
twice when done to apply
the settings.
6. Press /
Test
to confirm settings.
CHANGING A FLASH GROUP'S POWER MODE
Turn a Flash Group Off
Using a Transceiver in Master mode:
1. Press the desired group button (A, B, or
C) to toggle through the power modes
until you reach Off.
2. Press /
Test
to confirm settings.