background image

Precautions

1. 

The BG-P1 should be used with only the compatible 
devices and batteries specified in this manual.

2. 

Cover the power terminal with the contact 
cap when the BG-P1 is not in use. This prevents 
electrical shorts caused by metal objects touching 
the power terminals.

3. 

If you notice smoke, an unusual smell, or noise 
coming from the battery pack, discontinue use 
immediately. Remove the battery and contact the 
Vello Customer Service Department.

4. 

Keep this product away from water and any 
flammable gases or liquids.

5. 

Install batteries in the proper orientation. Installing 
batteries in the reverse orientation can cause them 
to leak, overheat, or explode.

6. 

Do not attempt to disassemble or repair this 
product.

7. 

Clean this product with only a soft, dry cloth.

8. 

Keep this product away from children.

9. 

Make sure that this product is intact and that there 
are no missing parts.

10. 

To avoid damage to this product, be careful not 
to overtighten or improperly thread any of the 
threaded fittings.

11. 

Remove the battery from the grip before long-
term storage.

12. 

All photos are for illustrative purposes only.

3

O

VE

R

VI

EW

IN

T

R

OD

U

C

T

IO

N

AS

SE

MB

LY

O

PE

R

AT

IO

N

Summary of Contents for BG-P1













Reviews: