WSPT1
Rev.
01
11/03/2010
©2009 Velleman
®
nv
5
•
Press the re-sync button
[F]
and wait ±6 minutes. If this doesn’t help, verify whether the
distance between main station and external sensor is within limits and no interference is present.
•
Outdoor temperature reading is (much) higher than water temperature.
•
The external sensor is probably in direct sunlight. Move it to a shady area.
8.
Batteries
main station
•
Flip down the foldable stand
[H]
to see the battery cover
[I]
.
•
Remove the battery cover
[I]
and insert 2 new identical 1.5V size AAA batteries in accordance with
the polarity markings inside the battery compartment
[L]
.
•
Close the battery compartment and press the reset button
[K]
.
•
The indoor temperature is shown and the link status indicator
[C]
flashes.
external sensor
•
Open the external sensor by turning the head counter clockwise. Slide the top part out of the housing.
The battery compartment becomes visible.
Be careful
not to touch the electronic circuitry.
•
Slide the battery compartment cover downward to open it. Insert 2 new identical 1.5V size AA
batteries in accordance with the polarity markings inside the battery compartment.
•
Press the reset button
[6]
.
•
Verify that the rubber seal is in place and in good condition. Place the top back and secure it by
turning clockwise until you hear a click.
General
•
Do not attempt to recharge non-rechargeable batteries, do not puncture or do not throw batteries in
fire as they might explode.
WARNING:
Handle batteries with care, observe warnings on battery casing.
Dispose of batteries in accordance with local regulations.
Keep the batteries away from children.
9.
Technical specifications
transmission frequency
433 MHz
transmission range
<= 30m (<=100ft)
measuring range
-40°C ~ +60°C (-40°F ~ 140°F) ±0.1°C (0.2°F)
main station
LCD size
41 x 36mm
power supply
2x 1.5V AAA (LR03C, incl.)
dimensions
72 x 24 x 121mm
weight ±100g
external sensor
LCD size
34 x 15mm
storage temperature
-50°C ~ +70 °C (-58°F ~ 158°F), non-condensing
power supply
2x 1.5V AA (LR6C, incl.)
dimensions
Ø100 x 155mm
weight
±205g
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.
©
COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
