WS3080
V. 05 – 08/11/2016
8
©Velleman nv
reset max
(both outdoor temperature
[12]
and
max
icon (between
[14]
and
[15]
)
are flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
reset min
(both outdoor temperature
[12]
and
min
icon (between
[14]
and
[15]
)
are flashing)
press and hold the ENTER button for ±3s to reset min value to current
measurement
UV index
Refer to
§8.2
for more information.
high alarm
set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
reset max
(both UV index
[15]
and
max
icon (between
[14]
and
[15]
) are flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
Wind
wind speed
select between average or gust wind speed (default = average)
speed unit
select between
km/h
,
mph
,
m/s
,
knots
or
bft
(Beaufort) (default = mph)
high alarm
set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
direction alarm
set the wind direction alarm
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
reset max
(both wind speed
[14]
and
max
icon (between
[14]
and
[15]
) are
flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
Light
light unit
select intensity unit between
fc
and
lux
high alarm
set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
reset max
(both light intensity
[17]
and
max
icon (between
[14]
and
[15]
) are
flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
Rain
display mode
select between 1h, 24h, 1 week, 1 month or total
unit
select between
mm
and
inch
(default = mm)
high alarm
set the high alarm level
Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,
the alarm icon
appears.
reset max
(both rain value
[16]
and
max
icon (between
[14]
and
[15]
) are flashing)
press and hold the ENTER button for ±3s to reset max value to current
measurement
reset total
(the rain value
[16], TOTAL
and
CLE [4]
are flashing)
press and hold the ENTER button for ±3s to reset TOTAL value to current
measurement
Use the HISTORY button
[f]
to enter the base station memory.
Note:
the default interval for data memory is 30 minutes. This interval can only be changed via the
software (refer to the section
PC connection
).
Use the
[d]
button to scroll down through the memory, use the
[c]
to scroll up.
Note:
when the end of the memory is reached, the base station returns to normal display.
To clear the complete memory, press the ENTER button
[b]
. The word
CLE [4]
and the memory indicator
[5]
will start flashing. Press and hold the ENTER button
[b]
for ±3s to erase the memory.
Note:
to save a copy of the memory on a PC, refer to the section
PC connection
.
