VTSS7
V. 04 – 03/01/2017
5
©Velleman nv
3.
General Guidelines
Refer to the
Velleman® Service and Quality Warranty
on the last pages
of this manual.
Protect this device from shocks and abuse. Avoid brute force when
operating the device.
Keep this device away from rain, moisture, splashing and dripping
liquids.
Familiarise yourself with the functions of the device before actually
using it.
All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
Nor Velleman nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial,
physical…) arising from the possession, use or failure of this product.
4.
Features
manual temperature setting
power-on LED indication
on-off switch
spare bits (not incl.): BITC7N1 (0.5 mm), BITC7N2 (1.5 mm), BITC7N3
(3 mm)
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
on-off switch
4
sponge
2
temperature setting
5
soldering station
3
holder
6
soldering iron
6.
Operation
1.
Carefully unpack the soldering station
[5]
and check all parts. Do not
use if the soldering station or any other part is visibly damaged.
2.
Mount the iron holder
[3]
onto the station and put the soldering
iron
[6]
in its holder. Lightly moisten the sponge
[4]
with some tap
water.
3.
Mount the appropriate soldering tip according to the soldering job (see
below
Replacing the Tip
).
