VRC8DP GB
6
LEARN MODE
The VRC8DP is equipped with memory banks for 10 devices. Each
device can hold a max. of 41 single data (code) keys and 6 special
multi-code keys. It also enables the user to store the codes for
multiple original remotes under 1 single device.
When a storage key is pressed, the display will show EMPTY if it
does not contain any data. The introduction of a new code will
erase the current code for that particular storage key.
Place an original remote "head-
to-head" with the VRC8DP’s IR
sensor window at a distance of
approx. 5–8cm (2-3 inches).
1. Press the LEARN button to
initiate the learn mode and the
LCD's "LEARN” mark will flash.
2. Press a device button (e.g. TV)
to select the memory bank of a
particular device.
3. Press the desired storage
button (e.g. button 1). The
LCD's LEARN mark will stay lit.
(The unit will return to the learn
mode if no data are received
within 30 seconds).
4. Press and hold a corresponding
button from the original remote
(e.g. button 1) until the LCD
displays “OK!”
The LCD's LEARN mark will
flash again when the sequence
has been learnt. Repeat step
(3) for the next storage key.
ORIGINAL
