VRC8DP GB
10
RENAMING SPECIAL MULTI-CODE KEYS
(1) Press the EDIT button and subsequently press the desired
special multi-code button once (e.g. S1).
(2) Use STEP 3 of "Editing of Storage Key Names" in order to
select the character or number in question.
(3) When the last character has been entered : press the same
special multi-code button again to edit the key name in
memory location n°2, etc. (max. 5 memory locations).
(4) Press the EDIT button to return to the realtime mode when
you are done.
KEY NAMES : PAGE SELECTION
Press the language button (button N) to select the name on page
1 or 2 for a particular key (the default language is ENGLISH). We
recommend that the user store his personal names for the keys
on page 2 : editing the default names on page 1 will erase them
permanently.
MACRO SETTING
The VRC8DP is equipped with 20 macro memories and
automatically transmits a series of commands by pressing just
two buttons : either MACRO & button 0 - 9 or MACRO & a
device button. Each macro memory supports a max. of 20
programmed steps. The user can insert a delay time of 1 to 99
seconds in between steps (accuracy : 0.5 seconds). Some
devices will not respond to certain commands when warming up.
Here is an example of how to programme a macro :
(1) Turn on the TV.
(2) Select the video input at the back of your TV.
(3) Switch on the LD.
(4) Open the device drawer of the LD… etc.
(5) Switch on the AV processor's amplifier (delay 5 seconds).
(6) Select the AV's input or output source.
Press the LEARN and then the MACRO button to engage the
MACRO LEARNING MODE. The LCD will display "MACRO ?"
and the user should enter 0-9 or press a device button.