VRC1601D
VELLEMAN
6
a.
Learning a Command
•
Press the device key you would like to learn a command
to.
•
Hold the SET key pressed for 3 seconds.
•
Select LEARNING using the or the button and
press OK.
•
Select LEARNKEY using the or the button and
press OK. The LCD will display SELECT KEY.
•
Select the target key you want to learn the command
(e.g. power) to. The LCD will display PLS SEND
SIGNAL IN.
•
Point the IR sensor of the
VRC1601D
towards the IR
sensor of the other remote control (max.
distance of 5cm).
•
Hold the original key on the other
remote control pressed until the LCD
of the
VRC1601D
reads SUCCESS.
Repeat the 3 steps above if the LCD
displays FAILED or to learn another
command.
Remark: - When transferring multiple commands to the same target button, the
VRC1601D
will only save the last programmed command.
-
All functions are transferable.
-
This remote control accepts up to 100 codes for a total of 8 devices. However, it may not accept some codes.
b.
Deleting a Learned Command of a Device
•
Press the device key you would like to delete a
command from.
•
Hold the SET key pressed for 3 seconds.
•
Select LEARNING using the or the button and
press OK.
•
Select DELETE KEY using the or the button and
press OK. The LCD will display SELECT KEY.
•
Press the key you would like to delete. SURE DELET
will appear on the LCD. Press OK to confirm. SUCCESS
will be displayed.
•
Repeat the step above for each key you would like to delete. Press a device key to exit the delete mode.
c.
Deleting All Learned Commands of a Device
Use this function to delete all the commands of a device instead of deleting all the commands one by one.
•
Press the device key you would like to delete the
commands from.
•
Hold the SET key pressed for 3 seconds.
•
Select LEARNING using the or the button and
press OK.
•
Select DELETE DEV using the or the button and
press OK. The LCD will display SELECT DEV.
•
Select the device you would like to delete using the
corresponding device key. Press OK.
•
SURE DELET appears on the LCD. Press OK to confirm.
•
Repeat the two steps above if you would like to delete
the commands from another device.
•
Press EXIT to quit.
Summary of Contents for VRC1601D
