Velbus manual VMB1DM – edition 1 – rev.1.0
11
Addressing:
Enter a unique address (from ‘00’ to ‘FE’ except for ‘81’, ‘91’, ‘A1’, ‘B1’, ‘C1’, ‘D1’, ‘E1’, ‘FE’ and ‘FF’) for each
module through the ‘ADDR’ rotating switches. These addresses can be used to learn the push buttons. In case of
a modification of the addresses, the lamp will be switched off and all LEDs of the corresponding control push
buttons will be turned off.
Time setting:
A time will be chosen depending on the configuration of the ‘TIME’ rotating switch:
TIME
Description
0
Moment control (the lamp will be on so long as the push button is being controlled)
1
5s timer or 5s dimming speed in slow on/off dimmer mode
2
10s timer or 10s dimming speed in slow on/off dimmer mode
3
15 timer or 15s dimming speed in slow on/off dimmer mode
4
30s timer or 30s dimming speed in slow on/off dimmer mode
5
1min timer or 1min dimming speed in slow on/off dimmer mode
6
2min timer or 2min dimming speed in slow on/off dimmer mode
7
5min timer or 5min dimming speed in slow on/off dimmer mode
8
10min timer or 10min dimming speed in slow on/off dimmer mode
9
15min timer or 15min dimming speed in slow on/off dimmer mode
A
30min timer or 30min dimming speed in slow on/off dimmer mode
B
1h timer or 1h dimming speed in slow on/off dimmer mode
C
2h timer or 2h dimming speed in slow on/off dimmer mode
D
5h timer or 5h dimming speed in slow on/off dimmer mode
E
1day timer or 1day dimming speed in slow on/off dimmer mode
F
No timer or maximum dimming speed in slow on/off dimmer mode
