6
VM130
USER MANUAL
Use:
NOTE: Operate the transmitter during at least 2 seconds.
The left remote button controls CH1 relay, the right remote button controls CH2 relay. Each
relay is equipped with a status LED. In ‘0.5s timer’-mode, a relay will remain on for as long
as the remote button is held.
If a timer has been set for a particular channel, the relay will turn on when the button is
pushed. When the preset time has elapsed, the relay will turn off. A timer can be turned off
at any time by pressing the transmitter button again. As long as the timer is running, the cor
-
responding led will flash.
In ‘ON-OFF’-mode, the relay will toggle between ON and OFF every time a button is pushed.
IMPORTANT: To minimise the idle current, remove the heating jumper if the unit is used
inside a car.
To remove all learned remotes from memory:
•
turn off the power (disconnect power supply)
• hold ‘setup’ button
•
turn on power (connect power supply)
• ‘MODE’ and ’CONFIRM’ start flashing
• release ‘setup’ after the LED’s turn off
u
This process takes about 10 seconds.
u
If the button is released before the LED’s turn off, the memory will not be cleared.
u
The unit will now respond to the default code only. Please also reset the transmitter to the
default code.
WARRANTY
This product is guaranteed against defects in components and construction from the moment it is
purchased and for a period of TWO YEAR starting from the date of sale.
This guarantee is only valid if the unit is submitted together with the original purchase invoice.
VELLEMAN components Ltd limits its responsibility to the reparation of defects or, as VELLEMAN
components Ltd deems necessary, to the replacement or reparation of defective components. Costs and
risks connected to the transport, removal or placement of the product, or any other costs directly or
indirectly connected to the repair, will not be reimbursed by VELLEMAN components Ltd. VELLEMAN
components Ltd will not be held responsible for any damages caused by the malfunctioning of a unit.
Mode
ON/OFF
0.5 s pulse
5 s
timer
30 s timer
1 min timer
5 min timer
15 min timer
30 min timer
1 h
timer
Flashes
1
2
3
4
5
6
7
8
9
