LEDA70NW/LEDA71NW/LEDA72NW
V. 05
–
17/12/2015
4
©Velleman nv
4.
Features
LED cabinet light
equivalent to T5 fluorescent lamp
easy installation
surface mounting
housing colour: white
on-off switch
accessories:
o
power supply cable
o
15 cm interconnection cable
o
interconnection connector
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
on-off switch
3
power cord with plug
2
power input
4
interconnection cable
6.
Installation
Refer to the illustrations on page 3 of this manual.
1.
Choose a suitable mounting location.
2.
Refer to the table on page 3 and take the correct measurements
[L]
according to your model.
Discretely mark the emplacement for the screws.
3.
Drill self-tapping screws (included) into the ceiling or wall, making sure to leave about 3 mm of the
screw thread exposed.
4.
Slide each hook over its screw, lock the hooks and tighten the screws.
5.
Fasten the body onto the hooks.
6.
Insert the power cord into the power input and connect to the mains. Note that you can
interconnect two lamps using the included interconnection cable or connector. It is advisable to
insert the end cap into the unused power output.
7.
Switch on and off with the on-off switch.
7.
Cleaning and Maintenance
This lamp does not need any particular maintenance.
Occasionally wipe the lamp with a damp cloth. Do not use harsh chemicals, cleaning solvents or
strong detergents.
8.
Technical Specifications
LEDA70NW
LEDA71NW
LEDA72NW
electrical data
power LED module
26x 2835 LEDs
52x 2835 LEDs
76x 2835 LEDs
total nominal power
< 5.5 W
< 10.5 W
< 15.5 W
nominal voltage driver
230 VAC
power factor
> 0.7
> 0.5
energy consumption (kWh/1000 h)
5.5
10.5
15.5
light technical data
colour
neutral white
colour temperature
4000 K
beam angle
140°
luminous intensity
120 cd
230 cd
335 cd
luminous flux
500 lm
1000 lm
1400 lm