Velleman PPS 10, Manual, Page: 70 / 72

70
PPS10 Pocket Scope
TM
Maximum sample rate 10MHz for repetitive signals (2MHz for single shot events)
Maximum input amplifier bandwidth 2MHz ( -3dB at 50mV, 1V & 20V /div x1 setting)
Input impedance 1Mohm // 20pF (standard oscilloscope probe)
Maximum input voltage 100Vpeak (AC + DC), 200Vpeak-peak (AC only)
Input coupling
DC, AC and GND (GND for auto zero reference)
Vertical resolution 8 bit ± 1bit linearity
Trigger modes Run, Normal, Once, Roll mode for 1s/div and slower timebase
LCD Graphics 64 x 128 pixels
Signal storage 256 samples with 2 memories, max. 125 samples visible (256 using X shift)
dBm measurement (0dBm= 0.775V in 600 Ω ) From -73dB tot +40dB (up to 60dB with X10 probe) ±0.5dB accuracy
dBV measurements (0dBV= 1V) From -75dB tot +38dB (up to 58dB with X10 probe) ±0.5dB accuracy
True-rms measurement From 0.1mV to 80V (up to 400Vrms with X10 probe) 2.5% accuracy
Peak to peak AC range (sinewave reference) 0.1mV to 160V (1mV to 1200V with x10 probe) 2% accuracy
Timebase range in 32 steps
0.2µs to 1hour / division
Input sensitivity range in 12 steps 5mV to 20V/division at X1 - 50mV to 200V/div at X10
Probe calibration output Approx. 2,5KHz / 5Vpp
Supply voltage
9VDC/ min 300mA adapter (unregulated) 12VDC if regulated
Batteries (option) Alkaline type AAA or Ni Cd / NiMH rechargeable ( 5 pcs required)
Charge current for rechargeable batteries 90mA
Battery life Up to 10h with Alkaline batteries (OFF or standby current < 100µA)
Operating temperature 0 to 50°C (32 to 122°F)
Fysical characteristics Dim: 155x100x45mm (6,2 x 4 x 1,8”) Weight 395 g (14oz.) ex. Batteries
RS232 output
Galvanic isolated RS232 output for PC
Specifications / Specificaties / Données techniques / Kenndaten