5
⇒
Use the check-boxes to mark your progress.
⇒
Please read the included information on safety and customer service
* Typographical inaccuracies excluded. Always look for possible last minute
manual updates, indicated as ‘NOTE’ on a separate leaflet.
1.3 Soldering Hints :
1-
Mount the component against the PCB sur-
face and carefully solder the leads
2-
Make sure the solder
joints are cone-shaped
and shiny
3-
Trim excess leads as close as possible to the
solder joint
REMOVE THEM FROM THE TAPE ONE AT
A TIME
!
Assembly hints
AXIAL COMPONENTS ARE TAPED IN
THE CORRECT MOUNTING SEQUENCE !
Summary of Contents for POWER BLOCK K8081
