3
Features & specifications
This power amplifier is an ideal set-up for active speaker use.
Build a high-quality system, using two (stereo) or more (surround) amplifiers.
Due to its auto switch-on, through input signal sensing, the unit can be installed
at almost any place.
Comes complete with enclosure and transformer.
Features :
fully discrete design using Epitaxial Darlington transistors
includes all connectors, transformer and enclosure
overload and short-circuit protection
DC error protection with LED indication
automatic switch-on upon input signal sensing (automatic switch-off)
Specifications
•
200W music power @ 4 ohm load
•
100W rms power @ 4 ohm load @ 10%THD
•
distortion: 0.02% @ 1KHz/10W
•
damping factor: >800
•
frequency response: 3Hz to 200KHz (-3dB)
•
sensitivity: 0.6V rms
•
signal to noise ratio: 115dB
•
power supply: 235 or 115 Vac
•
Auto sensing on time : 15min.
•
dimensions: 195 x 180 x 60mm (7.7" x 7" x 2.4")
Summary of Contents for POWER BLOCK K8081
