background image

PI300M & PI30024 v2                                                                                         GB 

2

4. OUTPUT CAPACITY 
 
The inverter will switch off automatically if the total wattage of the electrical 
appliances exceeds the inverter's output capacity. This will also happen if the 
temperature of the inverter exceeds 55°C due to prolonged use. 
 

 

5. SPECIAL RECOMMENDATIONS 
 
Unplug the AC inverter when not in use and when starting the vehicle's motor. 
 
If the AC inverter makes a beeping sound : switch off your appliance, unplug the 
inverter and restart your vehicle's engine. The beeping sound is simply the low-
battery warning which indicates that the voltage of your battery is getting low. 
Your inverter will shut down automatically if you do not restart your engine and 
continue the use of your inverter. This will leave your vehicle's battery at about 
10.5VDC (21VDC for a 24V inverter), enabling you to start your engine and 
resume operation of the inverter. It also eliminates the possibility of being 
stranded with a dead battery. 
 
To avoid over-discharging the battery, it is advisable to let your engine run for 10 
to 20 minutes after every 2-3 hours of using the AC inverter. This allows your 
vehicle's battery to recharge. 
 
Please remember to connect the "+" wire to the "+" terminal and the "-" wire to the 
"-" terminal if you choose to use an adapter for a direct connection between the 
AC inverter and the battery terminals. IF YOU CONNECT THE WIRES TO 
INCORRECT TERMINALS, THE POLARITY WILL BE REVERSED AND THIS 
WILL DAMAGE THE INVERTER. REVERSED POLARITY WILL INSTANTLY 
VOID YOUR INVERTER'S WARRANTY. 
 
Please remember to disconnect the AC inverter before using the battery charger 
to replenish you battery's voltage. Failure to disconnect the inverter prior to 
connecting a charger may result in an input spike which will damage the inverter. 
CONNECTING THE INVERTER'S INPUT TO A BATTERY CHARGER WILL 
VOID THE WARRANTY AND MAY DAMAGE THE INVERTER. 
 
The battery's voltage must never exceed 15VDC (30VDC for a 24V inverter). 
CONNECTING THE INVERTER TO A DC POWER SOURCE GREATER THAN 
15VDC (30VDC) WILL VOID THE WARRANTY AND MAY DAMAGE THE 
INVERTER. 

Summary of Contents for PI300M








Reviews: