Velleman PersonalScope HPS5, Manual, Page: 14 / 20

!
IMPORTANT: Put the appropriate measuring probe in the X10
position for measuring high voltages (>100Vp + DC).
NOTE:
⇒ The Y-position does not work in auto-setup, which is why the trigger
setup remains in run or normal mode.
⇒ The auto-setup function will deactivate when using the Trigger , Volt
and time per division and Y position functions. (see further).
Signal screen
The signal screen is an aid in displaying the divisions on your screen or
in positioning movable markers on the screen.
Press the “Display” key repeatedly in order to engage the various aids:
• A grid divides the screen into reference points.
• A cross inserts a co-ordinate system into the screen.
• Markers: Moveable markers in order to measure the signal (see below
for use).
• Empty : no aids.
GRID
CROSSHAIR
MARKERS
Display