MVR3
14.12.2010
©Velleman
nv
5
•
Make sure the recording switch
[14]
is in the OFF position (down).
•
Press and hold the power ON/OFF button
[16]
for ±3s to switch the voice
recorder on. To switch it off, press and hold the power ON/OFF button
[16]
again for ±2s.
•
The voice recorder starts up in voice standby mode
[j]
and shows the date, time
and available recording time for the current recording type.
Note:
after 5 minutes of inactivity in standby mode, the device automatically
switches off to save battery power.
•
Press and hold the menu
button
[9]
to enter the setup menu. The current menu
is shown on the display
[t, u, v, w, y, z]
.
•
To go to the next menu entry, press the next
button
[11]
.
•
To open the menu item, press the OK button
[8]
. To change the setting, press
the ‘
+
’
[6]
or ‘
-
’ button
[12]
. Press the OK button
[8]
again to save the current
setting. To exit the setup menu, press the
STOP
button
[10]
or wait a few
seconds.
•
Refer to the table below for the menu structure. The ‘#’ indicates the number of
presses on the next button
[11]
:
#
setting
1
set
time
:
set date and time
2
rec
mode
:
set record mode (type, see
[a, c, d, e, f]
)
1
:
# record
type
2
max.
time
3
remarks
01
LP (A)
16,800min.
ACT format, no VOR
02
SP (B)
4,200min.
WAV format, no VOR
03
VOR/LP (A)
16,800min.
ACT format, VOR
04
VOR/SP (B)
4,200min.
WAV format, VOR
05
HQ (C)
1,050min
MP3 format, no VOR
3
vor
senseNSITIVITY
:
set VOR sensitivity 01~05
4
set
eq
:
select pre-set balance (see
[n]
):
# [n]
remarks
01 NORMAL
natural
02 DBB
heavy bass
03 JAZZ
jazz
04 DISCO
disco
05 CLSS
classical
5
set
rep
: set repeat to none, one or all (see
[o]
)
6
see
space
:show the available recording time for the current record mode
1
VOR:
Voice-Operated Recording, recording starts when a minimum sound level is
detected and pauses when sound level drops below minimum
2.
target directory between brackets, depends on record type
3.
1GB disk space.
7.
Operation
Refer to the illustrations on page
2
of this manual.
•
Refer to
§6
for instructions on switching on and setting up the recorder.
•
See the current date and time by pressing the power button
[16]
shortly.
All manuals and user guides at all-guides.com
