manualshive.com logo in svg

Velleman K8046, Illustrated Assembly Manual, Page: 4 / 48

Share
Download
Velleman K8046 Illustrated Assembly Manual Download Page 4

4 

Specifications: 

 

 

LED status indication for each key/output 

 

Each key can be defined as toggle or momentary 

 

Soft touch, see-through touch panel with 8 keys 

 

Backlight with dim function 

 

Unique key-click feedback 

 

4 different functions (jumper selectable) :  

• 

Eight independent keys (toggle or momentary selectable) 

• 

Eight radio (rotary simulation) buttons 

• 

Four radio buttons and 4 independent keys 

• 

One key serves as a memory for 7 other keys or “clear all” key fitted. 

 

Features: 

 

 

8 open collector switches: max  50 Volt / 50mA (all outputs)   

 

Board to wire connectors: 20cm wire. 

 

Dimensions (including frame):  165x90x35 (depth) 

 

Usable temperature range: -5°C to +40°C 

 

Keyboard operating force: 40g. (with R0.8mm test point) 

 

Keyboard lifetime: 1.000.000 operations with R3mm rubber  

 

Power supply: 2 x 9VAC or 12VDC /  250mA max. 

 

Options : 

 

 

Optional infrared receiver module: IR38DM 

 

Optional BLUE BACKLIGHT: L-934MBC (8pcs required) 

Features & Specifications 

Summary of Contents for K8046

















































Reviews:

No comments