28
Final assembly
STEP 4
Position your lay-out onto the keyboard.
Make sure the lay-out is positioned in the
centre and in the correct surface/position.
Fix the lay-out using two pcs of clear tape.
STEP 5
Position the keyboard support like in the drawing, be-
tween the provided studs, there is only 1 way.
HINT:
to make the backlight more even and to prevent
seeing the backlight PCB, it is advisable to diffuse the
support plastic using some fine “sanding paper”
Again fix the plastic support using two pcs of tape.
Fig 16
Fig 17
Summary of Contents for K8046
