CLIB3
V. 01 – 06/03/2015
4
©Velleman nv
6.
Operation
1.
Make sure batteries are present inside the device.
2.
Press the on-off button
[A]
to switch on the LED. Press again to switch it off.
Remark:
Always place the
CLIB3
on a flat and steady surface.
7.
Battery Replacement
1.
Open the battery compartment
[B]
by releasing the 4 screws
[X]
(see arrows).
2.
Insert 4 new AA batteries following the polarity indications inside the battery compartment. Only
use new batteries with the same capacity. Preferably use alkaline
3.
Verify that the rubber sealing ring
[C]
is in good condition.
4.
Place the battery cover back and secure it with the 4 screws.
Remark:
Remove the batteries when the device is not going to be used for a longer period to avoid damage from
leaking batteries.
Warning:
Handle batteries with care. Keep batteries away from children. Dispose of batteries in accordance with
local regulations. Do not try to charge non-rechargeable (alkaline) batteries. Do not puncture or throw in
fire – explosion hazard.
8.
Cleaning and Maintenance
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
There are no user-serviceable parts. Contact your dealer for spare parts if necessary.
9.
Technical Specifications
LEDs
colour
RGB
number
36
size
5 mm
power supply
4 x 1.5 V AA batteries (LR6C, not incl.)
dimensions
Ø 230 x 240 m
weight
600 g
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
