FM9
08.07.2011
©
Velleman nv
5
5.
Overview
Refer to the illustrations on page
2
of this manual.
A
docking connector
H
standby button (STANDBY)
B
speaker (2x)
I
snooze button (SNOOZE)
C
power LED
J
FM antenna
D
display
K
battery compartment (2x)
E
source button (SOURCE)
L
external input (AUX)
F
volume down button (VOL-)
M
power switch
G
volume up button (VOL+)
N
DC input (7.5V)
6.
Use
Refer to the illustrations on pages
2
and
3
of this manual.
•
The FM9 can receive power either via batteries (not incl.) or via the mains (adaptor included).
Note:
when using batteries, the connected iPhone/iPod will not be charged.
o
Mains: plug the connector of the included mains adaptor into the DC input
[N]
. Make sure the
power switch
[M]
is in the OFF position and plug the adaptor into a suitable mains outlet.
o
Batteries: make sure the power switch
[M]
is in the OFF position and insert batteries in the
battery compartments
[K]
(refer to
§7
for battery handling instructions).
•
Set the power switch
[M]
to the ON-position. The power LED
[C]
lights up.
General
•
Most functions are only available through the remote control; only a limited number are available on
the device itself.
•
Remove the plastic tab from the remote control prior to first use.
•
Press the TONE button to set the Volume, Bass and Treble. Use the volume up and down buttons (on
remote: VOLUME ; on station: VOL-
[F]
/ VOL+
[G]
) to change the settings.
o
Press once to set the volume (0~40), the display indicates
Volume
.
o
Press twice to set the bass (-8 ~ +8, step 2); the display indicates
Bass
.
o
Press three times to set the Treble (-8 ~ +8, step 2); the display indicates
Treble
.
Note:
the output volume can also be set directly using the volume up and down buttons (on remote:
VOLUME ; on station: VOL-
[F]
/ VOL+
[G]
).
Setting the time
•
Press the TIME button; the hour indication starts to flash.
•
Change the hour using the volume up and down buttons (on remote: VOLUME ; on station:
VOL-
[F]
/ VOL+
[G]
).
•
Press the TIME button again to confirm and move to the minutes setting.
•
Set the minutes with the volume buttons. When finished, wait ±7s for the seconds to stop flashing.
iPhone/iPod
•
Gently place your iPhone/iPod (not included) on the docking connector
[A]
.
•
Press the power button on the remote control (
) or the STANDBY button
[H]
on the station; the
display
[D]
lights up blue.
•
Press the SOURCE button
[E]
until the display indicates
iPod
.
•
Press the MENU button to go to the iPod menu.
•
Use the and buttons (next to the SELECT button) to scroll through the menu; press SELECT to
choose an item.
•
Press the play/pause button (
) to play or pause music.
•
Shortly press the previous (
) or next (
) button to skip to the previous or next music track.
•
Press and hold the previous (
) or next (
) button to fast forward or reverse within the track.
Notes:
•
An incoming phone call on your iPhone will mute the music being played.
•
It is possible to leave your iPhone in the docking station to answer the call.
FM radio
•
Press the SOURCE button
[E]
until the display indicates
FM
.
•
Extend the antenna
[J]
for better reception.
•
Shortly press the previous (
) or next (
) button to adjust radio frequency by 0.1MHz. Press
and hold for ±3s for auto-scan.
•
To store a radio channel (preset), press the SELECT button. Choose a preset location (01~20) with
the and buttons next to the SELECT button to store.
•
To retrieve a preset channel, press the or button next to the SELECT button.
