WS610PF
24/04/2009
©2009 Velleman
®
Components nv
4
Photo frame
•
Insert a suitable SD/MMC card, contact pins facing the front of weather station. Make sure the
images are in JPEG format and smaller than 4000x4000 pixels.
Note: When the SD card is not recognized, the message ‘No SD card’ is displayed. Make sure
to use the proper SD/MMC card (32MB~2GB).
When picture pixel size is more than 4000x4000, the message ‘Too Large Size’ is
displayed.
•
Press and hold the On/Off button [C] for ±5s to switch off the photo display [A]. Press again to
switch it on.
•
Set the time interval of the slideshow by pressing the mode button [D]. Available modes: 5s,
10s, 30s or infinite (manual mode). The selected mode is displayed for a few seconds in the
upper right corner.
•
When in manual mode, press the
button shortly to see the previous image or press
the
button to see the next image.
•
At any time during image display, press and hold the
button to decrease image
contrast settings (darker, min. value 1) or press and hold the
button to increase
image contrast settings (lighter, max. value 28).
•
Press the rotate button [E] to rotate the image over 90°, 180°, 270° or back to original
position (0°)
Weather forecast
•
A weather forecast is given by displaying icons [B1] on the data display [B].
o
a ‘sun’ when humidity is between 19% and 40% RH
o
a ‘sun + cloud’ when humidity is between 41% and 65% RH
o
a ‘cloud’ when humidity is between 66% and 75% RH
o
a ‘cloud + rain’ when humidity is between 76% and 91% RH
Setting date and time
•
To set the date and time press and hold the Date/Time button [F] until the hour-mode (12/24)
starts flashing. Press the Set/Day button [J] to switch between 12h and 24h display and press
the Date/Time button [F] again to confirm. The seconds-indication starts flashing.
•
Press the Set/Day button [J] to reset the seconds to ‘00’ and press the Date/Time button [F]
to confirm. The hour-indication starts flashing.
•
Press the Set/Day button [J] until the correct hour is shown; press and hold to advance faster.
Press the Date/Time button [F] to confirm. The minutes-indication starts flashing
•
Press the Set/Day button [J] until the correct minutes are shown; press and hold to advance
faster. Press the Date/Time button [F] to confirm. The year-indication starts flashing.
•
Press the Set/Day button [J] until the correct year is shown; press and hold to advance faster.
Press the Date/Time button [F] to confirm. The month-indication starts flashing.
•
Press the Set/Day button [J] until the correct day is shown; press and hold to advance faster.
Press the Date/Time button [F] to confirm. The clock has been set and returns to normal
display.
•
to switch between displaying seconds or day of the week press the Set/Day button [J] during
normal time display.
Note: after ±30s of inactivity, the clock returns to normal operation mode.
Setting an alarm
•
During normal time display, press the alarm button [I]. The alarm time is shown.
•
To set the alarm time, press and hold the alarm button [I] until the hour-indication flashes.
•
Press the Set/Day button [J] until the desired hour is shown; press and hold to advance faster.
Press the alarm button [I] to confirm. The minutes-indication starts flashing.
•
Press the Set/Day button [J] until the desired minutes are shown; press and hold to advance
faster. Press the alarm button [I] to confirm.
•
To enable or disable the alarm, press the Set/Day button [J] when in alarm time display. A
small icon is shown next to the time when the alarm is enabled.
•
When the set alarm time is reached, the alarm will sound for ±30s. To stop the alarm, press the
alarm button [I]; to put the alarm on hold for ±8 minutes press the snooze button [L]. When
snooze mode is activated, a small Z
z
-symbol is flashing next to the time indication. To end
snooze mode press the alarm button [I].
