DVR4QA
- 4 -
GB
3. Configuration
a) Installing HDD
1) HDD Description
1. Handle of the HDD tray
2. Tray lock:
In position A (cf. drawing on the right), the tray is locked and cannot be removed.
In position B, the tray is unlocked and can be removed.
The key lock must be in position A before you switch on the device,
if not the hard disk drive cannot be used in a regular way.
3. Power indicator (green LED): lights up when the device is switched on.
4. HDD access indicator (yellow LED).
2) Installing the Hard Drive into the Tray
•
Unlock the tray lock of the tray, pull out the handle and pull the tray out of the device.
•
Push the release latch at the left ("OPEN") to slide the top cover backwards and remove it.
•
Connect the DC power cable and IDE cable to the HDD.
•
Insert the HDD in the tray and secure the HDD through the screw holes in the sides.
•
Put the top cover back on the tray and slide it forward to secure it.
•
Slide the tray back into the device and lock the tray lock.
3) Max. Recording Time
The recording time depends on the recording speed and quality. Please refer to the tables below:
Note: these data are the results of a test during which regular TV programs were recorded
NTSC SYSTEM
IPS
60 30 15 8 4 2 1
Best 12hr 24hr 48hr 90hr 180hr 360hr 720hr
High 15hr 30hr 60hr
112.5hr
225hr 450hr 900hr
Normal 24hr 48hr 96hr 180hr 360hr 720hr 1440hr
rec.
quality
Basic 40hr 80hr 160hr 300hr 600hr
1200hr
2400hr
HDD type
120GB
PAL SYSTEM
IPS
50 25 12 6 3 2 1
Best 12hr 24hr 50hr 101hr 203hr 304hr 608hr
High 15hr 30hr 63hr 127hr 253hr 380hr 760hr
Normal 24hr 49hr 101hr 203hr 405hr 608hr 1220hr
rec.
quality
Basic 41hr 81hr 168hr 338hr 675hr
1013hr
2025hr
HDD type
120GB