CCTVPROM17
V. 03 – 05/05/2014
9
©Velleman nv
10.2
Enabling Push Video
From iPhone or iPad
1.
In the iPhone/iPad main menu, select
Settings > Notifications
.
2.
Select
EagleEyes
and make sure
Notification Center
is set to
ON
.
3.
Open EagleEyes and switch the
Push Video
button to
ON
. You receive a message that push notification (push video) is
enabled.
4.
Return to the main menu of your iPhone/iPad.
You receive event notifications when there is an alarm event. Select
Launch
to play the recorded clip immediately.
From Android Mobile Device
In the address book, switch
Guard
from
OFF
to
ON
.
11.
Technical Specifications
video format
PAL
video compression
H.264
video input
8 channels, composite video signal 1 Vpp / 75 ohm BNC
video output
composite video signal 1 Vpp / 75 ohm BNC
VGA
max. 1600 x 1200 pixels
HDMI
max. 1600 x 1200 pixels
video loop out
–
maximum recording rate
(PAL)
frame
704 × 576 pixels @ 100 fps (PAL)
CIF
352 × 288 pixels @ 200 fps (PAL)
adjustable recording speed –
image quality setting
best – high – normal – basic
hard disk storage
built-in SATA type, supports 1 x HDD, supported HDD capacity 2 TB (HDD not incl.)
recording mode
manual / timer / motion / network / alarm
refresh rate
200 IPS for PAL
multiplex operation
live display, record, playback, backup and network
audio I/O
4 x audio in, 1 x audio out (mono)
motion detection area
16 × 12 grids per channel
motion detection sensitivity high, normal, low
pre-alarm recording
8 MB
backup device
USB 2.0 flash drive (for backup and firmware updates)
