CAMSET19
VELLEMAN
4
4. Wiring Diagram
A
4.2” indoor monitor
B
outdoor camera
C
PSU
D
door lock
E
door lock power supply
1
video
yellow
2
GND
black
3
+12V power
red
4
audio
green
5
lock A
6
lock B
5. Installation
•
Indoor Monitor
•
Choose an appropriate installation spot out of direct sunlight. The
recommended installation height is 1.6m.
•
Measure the distance between the holes on the mounting bracket and
drill holes accordingly. Place a plug into each hole and fix the bracket
using the screws.
•
Wire the videophone according to the wiring diagram.
•
Fix the indoor monitor firmly onto the bracket.
•
Outdoor Camera
•
Choose an appropriate installation spot out of direct
sunlight and rain. The recommended installation height is
1.6m.
•
Measure the distance between the holes on the mounting
bracket and drill holes accordingly. Place a plug into each
hole and fix the bracket using the screws.
•
Wire the outdoor camera according to the wiring diagram.
•
Place the intercom unit firmly into the bracket and tighten
with the screw.
6. Use
•
As soon as a visitor presses the doorbell, the videophone will chime and display the image picked up from the intercom
unit. Press to talk (the image will be displayed for 2 minutes). The image will be displayed for 30 seconds if the
button is not pressed.
•
The door can be opened by pressing the unlocking button provided that an optional door latch has been installed
(drive voltage of 12V).
•
Press the button to display the image picked up from the intercom unit at any time. The image will automatically
disappear after 10 seconds.
•
Press
to activate the alarm.
•
Adjust the volume, the hue and the brightness no using the corresponding adjustment sliders.
Summary of Contents for CAMSET19
Page 2: ......
