CAMCOLVC4
08/04/2009
6
©2008
Velleman
®
Components nv
•
Press the ‘start’- button ( ) to start capturing camera images. Press
the ‘stop’-button ( ) to stop.
•
Go to ‘Option’ to configure camera settings e.g. brightness,
saturation, output size ….
•
When the camera is running, press the
-button to take a
snapshot. A thumbnail is shown in the application window. Select a
thumbnail and press the
-button to save it to disk, or press the
-button to save all snapshots. Enter the desired storage directory.
Caution
: when closing the application, snapshots that are not saved
to disk are lost.
9.
Review images on SD card
•
Images saved on the SD card can be transferred to a PC.
•
Plug the A-plug of the included USB cable into a free USB port.
•
Make sure the power ON/OFF switch
[7]
is in the OFF position.
•
Plug the mini-B connector into the mini USB port
[6]
.
•
The PC will recognize the
CAMCOLVC4
as an extra disk and
prompts what to do. Select ‘Open folder to view files’.
•
All images are located under the ‘DCIM’-directory. Copy the desired
files to the PCs’ hard disk.
•
It is also possible to use the
CAMCOLVC4
software to
copy images. Locate the
MR97316MarsPCAM icon on
the desktop and double
click it. The application
opens:
•
Choose the source image(s)
and define the target
folder. Press the ‘Go’ button
to copy the selected
image(s).
Note:
Always stop the device before unplugging the USB cable. Use
the ‘Safely remove hardware’-icon in the notification area to open the
dialog box and stop the appropriate USB storage device.