CAMCOLVC13
28.07.2010
©Velleman
nv
4
•
2 powerful LEDs: to illuminate in dark circumstances and as warning
signal
•
user-friendly setup via push buttons
•
comes with USB cable, bike bracket, window bracket and strap bracket
5.
Overview
Refer to the illustrations on page
2
of this manual.
1
Camera Lens
Clean the lens by soft dry cloth before usage
2
LED Light
2 Powerful LED to light/flash during low light
situations.
3
Microphone
Advanced sensitivity microphone to record audio
4
Power LED Press
to turn on/off the camera
5
Live Record
Press
to record live videos or stop recording.
6
Snapshot
Press
to take single JPG photos
7
LED Button
Press
to turn on/ off LED light
8
LED Flash
Press
to flash LED light or stop flashing LED
9
Open
Push
to open the casing
10
Wrist Strap Hook
Attach wrist strap (included)
11
Mount Base
To support brackets and straps
12
Battery
compartment
Holds 2 rechargeable lithium batteries.
13
USB Port
Plug in USB cable to upload data
14
Micro SD Slot
Insert Micro SD card (up to 32 GB supported)
6.
Use
Before use
•
Open the housing. To do this, press the open button
[9]
and gently slide
the housing open towards the back.
•
Insert batteries (refer to
§8
)
•
Insert a micro SD card (not incl.) into the card slot
[14]
. Refer to the
indication next to the slot for the right direction. Only use a new card from
a reliable brand. Approximate recording times:
HD 1280x720 (30FPS)
2GB 4GB 8GB 16GB
32GB
Recording
Time
(Hours) 1 2 4 8 16
•
Press the power button
[4]
shortly to set the camera in standby-mode. A
red LED under the power button lights up.
•
Connect the USB-port
[13]
to a PC using the included cable. The LED
turns blue. The batteries are now being charged. Make sure batteries are