CAMCOLD8N
12.02.2010
©Velleman
nv
4
card n° aperture suggested use
1 F2.0
most
environments
2
F2.8
fluorescent light conditions, suppress rolling
3-8 F1.4
dark
environment
•
Mount the dome camera in the desired location. Use the
base as a template for the mounting holes.
•
Connect the video/power cable to the PCB. The connector
only fits in one way, do not force. Connect the video
[1]
and power
[2]
lines.
•
Point the camera towards the field of interest.
•
Release screw
[A]
until the housing can be moved and
set the desired zoom factor. Tighten screw
[A]
hand
tight.
Do not
force
to avoid damage to the mechanism.
•
Release screw
[B]
until the housing can be moved and set the desired
focus. Tighten screw
[B]
hand tight.
Do not
force
to avoid damage to
the mechanism.
•
Place the inner cover back (do not cover the camera lens).
•
Place the outer cover back and secure it by turning it clockwise.
5.
Technical specifications
pick-up element
1/3" HR colour CCD image sensor
pixels 752(H)x582(V)
PAL
horizontal resolution
520 TV lines
min. illumination
0.1 lux / F2.0
S/N ratio
> 48dB (AGC off)
electronic shutter
1/50 to 1/100000s
lens 4.0mm
~
9.0mm
lens angle
73° ~ 36°
iris mode
AES
aperture
F1.4, F2.0 or F2.8 (3 iris cards included)
white balance
ATW
video output
1Vpp @ 75 ohms
power supply
12VDC ±10%
current consumption
70mA ± 10%
dimensions
131 x 122 x 85mm
weight 210g
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulted from
(incorrect) use of this device. For more info concerning this product,
please visit our website www.velleman.eu. The information in this
manual is subject to change without prior notice.
