BTSP2
00 (01/02/2011)
5
Velleman
®
7.
Operation
Note:
prior to using the
BTSP2
for the first time, both headset and
base station should be charged fully (see
§8
).
Consider charging base station and headset separately; when
charging the headset through the base station, the latter will
get priority and will be charged first.
•
To switch the base station on, place the ear device
[A]
into the
base station. Make sure the USB connectors
[A1]
and
[G]
are
securely fit. Press and hold the function key
[A2]
for ±6 seconds.
The LCD display
[E]
shows
888888888888
, followed by
ON
.
•
To use the ear device
[A]
stand-alone, remove it from the base
station and press and hold the function key for ± 6 seconds. The
base station remains off.
•
Adjust the volume of the ear device
[A]
, using the volume up
[6]
and volume down
[7]
buttons. Adjust the volume of the base
station speaker
[B]
by turning the volume knob
[C]
.
•
Switch the car kit off by pressing and holding the function key
[A2]
for ±8 seconds. The LCD display
[E]
shows
OFF
.
pairing
The device must be associated with a Bluetooth
®
compatible mobile
phone before use.
•
Press and hold the function key
[A2]
until the status indicator
[A3]
flashes red and blue.
•
Enable the Bluetooth
®
function on the mobile phone (not incl.).
•
On the mobile phone, select
BTSP2
and enter the password
(
0000
) to confirm pairing.
•
The base station displays
CONNECTED
and the status indicator
[A3]
flashes blue with a 5 seconds interval.
•
Note that some mobile phones will not connect until a call is
received or made.
voice dialling
Voice dialling requires a mobile phone that supports this function.
•
Verify that the status indicator
[A3]
flashes blue (interval 5s).
•
Press the function key
[A2]
once. The display shows
VOICEDIAL
and
a voice dialling prompt is sent.
•
Respond with a pre-recorded voice tag. The base station repeats
the voice tag and the number is dialled.
