VELGE Rodoy, Installation, Operating And Maintenance Instructions

Page: 8 / 17

www.velgehome.com
press
2 3 4
to select functioning speeds. By pressing of the command
0-1 the motor starts running at the 1
st
speed. The commands 2 3 4
switch the motor on respectively at the 2
nd
, 3
rd
and intensive speed.
In order to switch the motor off press 0-1 once if set at the 1
st
speed, twice
if set at the 2
nd
, 3
rd
and intensive speed. With the button 4 , select the
maximum speed of the extraction fan for 5 minutes (button blinking),
after which the extraction fan will automatically switch to the 3
rd
speed.
Adjustable and delayed self switching off
Pressing 0-1 for three seconds the 4 speed keys start blinking. The speeds
correspond now to the choice of 5-10-15-20 minutes of self switching off.
Pressing one of these buttons, it will blinks showing you the chosen time
and the key corresponding to the current speed will light on.
0-1 corresponds to 5 minutes
2 corresponds to 10 minutes
3
corresponds to 15 minutes
4 corresponds to 20 minutes
While the self switching off is in function, it is possible to modify the
speed previously set.
If you select the maximum speed, after 5 minutes the extraction fan
switches to the 3rd speed and will automatically turn off at such speed.
MUSIC
key: Bluetooth. Press three seconds to activate the Bluetooth (the button
starts flashing). Enable the Bluetooth on the external device and research
the hood (initials RN52- .......). Once connected the button light stops
blinking and stays on, the display will show BT. Use the external device to
manage music and phone calls.
Use the key (volume) to adjust the volume, the display will show
the volume level
To accept or end a call press the key. During a phone call, the display
will show “CALL”. During a phone call you can adjust the volume using
the key
To disconnect the external device, hold for three seconds the key, the
device will be disconnected and the backlight intensity of the button will
reduce in stand-by mode.
key: Radio. Press three seconds to activate the radio. The backlight
button lights up, the display will show the radio station frequency. To
change frequency press the keys Use the key to adjust the volume,
the display will show the volume level
To turn off the radio press the radio key for three seconds, the radio turns
off and the backlight intensity of the button will reduce in stand-by mode.
The radio does not work when the hood is already connected with
Bluetooth and is receiving music from the external device or when there
is an active phone call.
Phone calls and the transmission of music tracks has priority over the
radio.
In any case, after 10 seconds of unused, the display will show the volume
level.
Filters maintenance reminder
Aluminium anti-grease filters
Once the hood is switched off, after 30 hour functioning, all the leds of the
speed buttons switch on with a fixed light for 30 seconds to remind that
aluminium anti-grease filter need cleaning.To reset the timer keep
pressed the buttons 0-1 + 4 with the aspirator switched off, otherwise the
reminder will occur again when the hood is switched off.
Charcoal filter (for filtering hoods)
Once the hood is switched off, after 120 hour functioning, all leds blink
for 30 seconds to remind that the charcoal filters (if present) need to be
replaced.
To reset the timer keep pressed the buttons 0-1 + 4 with the aspirator
switched off, otherwise the reminder will occur again when the hood is
switched off.
MAINTENANCE