VELDO SSH
32
WORKING AND CONTROL OF AUTOMATIC DOOR SYSTEM
3- When the door is closed:
If one of the following events occurs, the door stops and
reopens.
- If a jamming door in the closing direction detects excessive current,
- If there is a impact in the safety wick while the door is closed
- If the door is pulled out while the door is closed
- If the panel button is pressed while the door is closed
- If the control is pressed while the door is closed
On-off commands:
1- Close commands:
- If the vehicle is moving and the vehicle speed is 5 km or more and the door is
attempted to be opened from the inside, it closes immediately without allowing
manual opening.
- If the door is opened automatically, if the vehicle is started and the handbrake is
lowered, the door goes to the close and even if the open commands are given in this
position, the door is not opened, it is notified in short tones by voice warning.
- The door is open and the car speed is 5 km and automatically switches off regardless
of how it is opened or in which position it is.
- When the door is open and the vehicle speed is less than 5 km, the parking brake is
activated when the handbrake is applied or the ignition is off. The door automatically
closes when the control is active.
2- Open commands
When the door is closed and the vehicle speed is below 5 km, the handbrake is applied
or the ignition is switched off automatically when the panel switch and the control are
active.
