VELDO SSH
29
WORKING AND CONTROL OF AUTOMATIC DOOR SYSTEM
Initial working status:
Control unit is connect to facilities and when the insurance is installed and
the first energy is supplied;
-The remote control of the car is activated by pressing the central locking buttons,
then the central locking button is activated and the remote control is activated.
- The door is manually opened. When the panel button is held pressed and the
short buzzer starts to be heard, the open command from the control panel is given and the panel
button is released. In this case, the door first goes to the closing direction, then to the opening
direction and finally the door closes completely, The buzzer 2 identifies the encoder by giving a
short beep.
- In this position, the buzzer is constantly bouncing and waiting for commands. Door
closes after command. All the lights on the control unit are turned off and the buzzer is muted.
General Work:
When the door is opened
- The lock catcher gives out the door.
- Unlocking engine unlocks the door by tapping the unlocking wire.
- The door starts to open the engine door, during this operation the buzzer will be
tugged in long tones to indicate that the door has been opened.
- Opening is as much as the taught opening, the door system measures this
distance with the encoder
