- 15 -
9. INSTALLATION OF THE GREENHOUSE
9.1.
Before starting work, you should carefully level the site on which the
greenhouse will be installed.
9.2.
Dig holes or trenches sufficient in length and width under the lugs.
9.3.
Set up the assembled greenhouse so that the lower end lintels are flush with
the ground and the lugs go deeper into the ground.
9.4.
Cover the lugs with soil and press the ground down.
When lowering the greenhouse into a trench or pits, make sure that there is no
longitudinal distortion of the frame and no displacement of the tie straps from the
arches. After tamping the ground, make sure that the tie straps are not sideways
and are located along the arches. Adjust tapes if necessary.
To strengthen the greenhouse, you can use a wooden, concrete or brick
foundation.
OPTIONAL EXTENTION OF MAGNOLIA 19.5’ GREENHOUSE DIAGRAM
Possible Extension up to 32’
Quantity of Polycarbonate sheets for different size of Greenhouse MAGNOLIA
13’L x 10’W x 7’H (1 Base) – 3.5 sheets Total
19.5’L x 10’W x 7’H (1 Base, 1 Insert) – 5 sheets Total
26’L x 10’W x 7’H (1 Base, 2 Insert) – 6.5 sheets Total
32’L x 10’W x 7’H (1 Base, 3 Insert) – 7.5 sheets Total
