- 18 -
8. MOUNTING
OF
CELLULAR
POLYCARBONATE
(CP)
ON
THE
SIDE
WALLS
The parts "E" with the size of 2100x1650mm are used for mounting.
8.1.
Start mounting the CP sheets to the sides from the end-faces. Place the CP
sheet to the side of the framework, aligning the top of the CP to the center of angle
piece #29 and the side edge of the CP to the end post.
8.2.
Using self-tapping screws #38 through the thermal washers #39 fasten the CP
to the side posts and longitudinal stringers according to the scheme of fixing the
polycarbonate on the side walls.
8.3.
Similarly, mount the remaining side sheets of CP, overlapping with the
previous ones, as well as on the opposite wall.
Scheme of polycarbonate fastening on the side walls.
Attention! CP sheet is not attached to the posts of the end-faces!
(vertical joint of polycarbonate is fixed with an angle piece)