VMBKP
23
Velbus
–
Legen Heirweg 33, BE-9890 Gavere, Belgium
–
tel. +32 9 384 36 11
–
e-mail: [email protected]
–
www.velbus.eu
PN-VMBKP-ed1-A4
(c)
Use ID number 003 in Group 1 to store the card, which is one of the IDs in the range 000-999
(d)
Hold the card close to the reader, one beep confirms the reading. (No need to key in a Common User Code but
there MUST be a Common User Code already recorded in Location 03 for User Group 1 or 04 for User Group 2,
see p.20 for more information).
(e)
Press # to store the Card, a double beep confirms a valid entry
2.
Operation (while the keypad is back in operation mode)
Read card Common User Code
#
(a)
(b)
(c)
(a)
Present the Card. A double beep confirms the reading and a 30 seconds delay is given for entry of the Common
User Code, the Amber LED keeps flashing
(b)
Key in the Common User Code “1 3 5 7” (the number previously programmed in location 03)
(c)
Confirm it with the # key. User Group 1 channel activates.
Example 5: Delete a User Code and/or Card (for User Group 1 or 2)
1.
Delete a User Code or a lost Card
1 0
5
User ID
#
(a)
(b)
(c)
(d)
(a)
Enter the User Group that the User ID belongs to. “1 0” for Group 1, “2 0” for
Group 2
(b)
Enter “5”, the Command Code for making a deletion
(c)
Enter the User ID
(d)
Press the # key. A double beep confirms a valid entry and the Code and/or Card associated with that User ID are
cleared
2.
Delete a Card (that you still have)
1 0
5
Read Card
#
(a)
(b)
(c)
(d)
(a)
Enter the User Group that the Card belongs to. “1 0” for Group 1, “2 0” for Group 2
(b)
Enter “5”, the Command Code for making a deletion
(c)
Present the EM card. A single beep confirms the reading. Reading the card is sufficient for a valid deletion of a
card working with a Common User Code or a Secondary User Code
(d)
Press the # key. A double beep confirms a valid entry. The Card associated with that User ID is cleared.
Example 6: Clear the whole group of users
The whole group of users including the Codes and Cards can be cleared with the following command.
1 0
0 9 9 9
#
(a)
(b)
(c)
(a)
The User Group 1
–
“10” is selected to be cleared. “20” for Group 2
(b)
Key in the Group Deletion Command: 0 9 9 9
(c)
Confirm the deletion with #. All the User Codes and Cards in Group 1 are cleared. It takes a few seconds to a
minute to complete depending on the amount of data stored.
Summary of Contents for VMBKP
Page 1: ......