Velbus VMB4RYLD Installation Manual Download | Manualshive

Page: 10 / 70

background image

VELBUS INSTALLATION GUIDE

©2015 Velbus

10

www.velbus.eu

in many cases users will want to make changes to the configuration. With
Velbus this can be easily achieved without breaking open any walls or hindering
normal functioning of the working system.

Since a Velbus system is modular, it will at all times be ready for future
developments. Velbus invests continuously in the development of new
modules and features, which can be easily added to an existing system. If you
decide to use a dimmer after all instead of the on/off function you installed, all
you need to do is add a dimmer module. Your house will at all times be ready
for the future.

A Velbus installation needs no extra modules or special programming to
provide feedback. Standard feedback is provided out of the box: the LEDs on
push-buttons for instance will be on if the coupled light is on, they will blink if
a timer is running, and so on. This standard feedback is also completely
reconfigurable, for example by coupling the LED of a pushbutton in the living
room to give feedback about a light in a nursery, and so on.

Properly configured, your Velbus automation system also saves energy.
Imagine for instance a light in the hallway that automatically turns off, a
feedback LED that reminds you the l

ight on the driveway is still on, an “all off”

switch that takes care of all hidden consumers and automatically puts the
heating in energy saving mode, and so on.

The benefits of an automated home are plentiful because of the many options
and functions. Alarm timers, remote control (by iPod®, iPad®, iPhone®,
smartphone or web browser), burglar alarm, fire alarm, media player control,
email and SMS notifications, and many more are just waiting to be dreamt up.
Velbus can take care of it all. Not to forget the added value that your home or
investment property will enjoy.

PRICING VS. FUNCTIONALITY

Both for small (residential) and larger (commercial) automation projects,
Velbus always offers the most economical solution. A Velbus system does not
require a central (or master) controller, so you will neither have to buy one,
nor pay for maintaining, repairing or upgrading it. For the same reason a Velbus
installation is also less likely to suffer a total systemic failure or need expensive

«
...
8
9
10
11
12
...
»

Summary of Contents for VMB4RYLD







































































Reviews:

No comments

Related manuals for VMB4RYLD

Brand: Mercku Tech Pages: 10

MULTI CONTROLLER

Brand: AUTO HOMATION Pages: 13

Brand: Knightsbridge Pages: 11

Brand: Monster Pages: 16

Smart IR Controller

Brand: USUNG Pages: 22

MULTIRELAY ZEN16

Brand: ZooZ Pages: 2

Brand: Velux Pages: 44

Brand: MP Solutions Pages: 2

Decora Smart DZPA1

Brand: Leviton Pages: 2

Brand: Leviton Pages: 3

Decora Smart DZ15R

Brand: Leviton Pages: 16

Brand: Niko Pages: 4

Brand: Niko Pages: 36

Smart Translator WL-ZWWWDPW-0101-01

Brand: logika Pages: 8

Brand: Gocontrol Pages: 2

Brand: Aztech Technologies Pte Ltd. Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands