background image

Model designed for use in Australia and New Zealand.

Rated current of 10A, Rated voltage of 240v, or otherwise specified.

Earth connected, with shell earth contact. 

USB Power Output 5v. Refer to the product tag for model specific specifications. 

SPECIFICATIONS

INSTALLATION

Contact your local 

distributor for support. 

Manufactured by 

Modern Power Solutions 

Support

V1B, V1S

Model Options

Standard:

2x Power Outlets*

2x USB Power Outlets*

*Outlet options may vary per model

Outlet Configuration

85mm Diameter (Best Fit)

83-90mm Diameter Suitable

Hole Size

1. Drill a hole in the required installation surface. The hole size diameter is indicated 

above in the model specifications. 

2. Undo the mounting ring by spinning it clockwise with the unit pointing upside down.  

3. Once the mounting ring is undone and removed from the unit, feed the power cable 

through the top of the installation hole, then place the unit inside this hole, so that it 

can fit flush with the bench-top. 

4. Feed the mounting ring back through the cable, and tighten thoroughly to secure the 

unit to the bench-top. 

5. Plug the power plug into an Australia power protected circuit. 

6. The unit is ready for use. Press lightly on the outer part of the unit to depress the 

ring up. Then pull on the inner part to pull raise model up completely. Push the unit 

back down to retract. 

V1 RANGE

USER MANUAL

Reviews: