18
Configuration and setting
Outputs number configuration
NOTE
You can choose two types of configuration
for Outputs No: TV2 & TV1 or TV1.
By default your equipment is configured for
two outputs (TV1 & TV2).
1)
In the advanced menu, located and select
OUTPUT CONFIGURATION TV2&TV1.
y) OUTPUT CONF TV2 & TV1 select
Self-installation
NOTE
The equipment automatically configures the optimum operating frequency and gain
of the UHF filters. The equipment does not automatically configure the output level
of general (band) gains. This is because the output level must be set by the installer
to suit the network you are feeding.
1)
In the main menu, locate and select
AUTOINSTALL.
a) If NO is selected: you will return to the main
menu.
b) If YES is selected: self-installation will
begin...
NOTE
The equipment displays information on the
status of self-installation. Please wait a few
seconds until it is completed and
AUTOINSTALL COMPLETED is displayed.
2)
Select OK to complete self-installation. The unit
will now show you the general (band) gain
settings for adjustment.
3)
To change the output level of general gains, see:
General gain adjustment.
4)
To review the allocation of filters to aerials, see:
Allocation of filters to antennas.
TV2 & TV1
TV1
