background image

VELA 

TANGO 

EL

VELA 

TANGO 

EL

VELA 

TANGO 

EL

vl1935.dk/charge

1 4

2.0.17. STROLLING BRACKET*

Strolling bracket for transporting a person in the chair. The 
strolling bracket is mounted to fittings under the seat using 
two finger screws. This is also where the depth is adjusted. The 
height is adjusted by pressing the two buttons on the side of 
the bracket while the handle is positioned at the desired height.

2.0.18. CHARGING (ELECTRIC)*

Daily charging is recommended

. Remove the operation plug 

from the back of the armrest and place it in the charger as 
shown. The charger is plugged into an electrical outlet. When 
the chair is charging, the LED on the charger is yellow. When 
the chair is fully charged, the LED turns green.

 

Note: 

The chair should not be used during charging.

2.0.19. HAND BOX (ELECTRIC)*

The hand box is used via push buttons on the front. 
VELA hand boxes can have one or more functions. 
The icons on the hand box show the button functions.

Note

: Insert plug in hand box to operate functions.

Warning: 

The chair’s operating specifications for temperature 

change when using the hand box to + 5°C to + 40°C!

2.0.20. ELECTRIC BRAKE (ELECTRIC)*

The electric brake is activated and deactivated using the hand 
box or switches. It is advisable to activate or deactivate the 
brake completely when using this feature. Can also be used 
together with the 4-wheel brake (see section 2.0.21.)

Note

: The brake can only be used via switches under the 

armrest, the hand box, or angle switch.

Summary of Contents for Tango 600S

















Reviews: