22
Issue V1.0 (2014-01-10)
5.5 Lens Control
Figure 5-5 shows the lens control interface.
Figure 5-5
Lens control interface
The electrical focusing lens can be controlled and adjusted.
5.6 Temperature detection parameters
Configuration instructions
a)
Temperature unit default in Celsius degrees (
℃
), Fahrenheit (
℉
) Optional
b)
Ambient temperature is for outside environment, it is changeable for user, and inside cavity
temperature is not editable.
c)
Recommended to use inside temperature for ambient temperature when environment
temperature changes quiet often.
d)
Correction coefficient is used for correcting the temp difference with real temperature.
Under normal circumstances does not recommend using this parameter
e)
Area temp display mode is an optional for user to choose the display position.
Thermal Imaging Integrated Network Camera
User Manual
Parameter Setting
Summary of Contents for VPIP-THERMAL-XX22
Page 7: ......
