9
1 Function Description
2 Important Safety Information
Test
Press and hold the TEST key, the product enters the test state. When the red light flashes, the buzzer sounds, and
the action mode is the same as the alarm mode,it mean normal working ;When the red light flashed every 8 seconds,
with a “DI” sound alarm , it means abnormal working.
Alarm
The Red LED will flash very quickly and “DI DI DI” alarm sound will be issued by the buzzer.
Mute
When Alarming, Press the button to turn off the buzzer and the Red LED flashes every 9 seconds. The mute time is
about 9minutes and it will turn back to alarm state.
Low Voltage Alarm
When the voltage is less than 2.7V, A short “DI”sound alarms are issued and the Red LED flashes every 50S.
Normal Work
A Red LED flashes once every 50 seconds.
Warning! Please Read And Save These Instruction
DO NOT remove or disconnect battery to quiet unwantealarms. This will remove your protection. Open windowor fan
the air around smoke alarm to silence it.
The test button accurately tests all smoke alarm functions. DO NOT use any other test method. Tessmoke alarm
weekly to ensure proper operation.
This smoke alarm IS NOT designed to be the PRIMARprotection for buildings that requirecomplete fire alarm
systems. Buildings of this type include hotels, motelsdormitories, hospitals, nursing homes, and group homes This is
true even if they were once single family homesHowever, this smoke alarm MAY be used insideindividual rooms as
SUPPLEMENTAL protection.
Install a smoke alarm in every room and on every level of the home. Smoke may not reach the smoke alarm for many
reasons. For example, if a fire starts in a remote part of the home, on another level, in a chimney, wall, roof, or on
the other side of a closed door, smoke may not reach the smoke alarm in time to alert household members. A smoke
alarm will not promptly detect a fire EXCEPT in the area or room in which it is installed.
Smoke alarms may not alert every household member every time. The alarm horn is loud in order to alert individuals
to a potential danger. However, there may be limiting circumstances where a household member may not hear the
alarm (i.e., outdoor or indoor noise, sound sleepers, drug or alcohol usage, the hard of hearing, etc.). If you suspect
that this smoke alarm may not alert a household member, install and maintain specialty.
Smoke alarms. Household members must hear the alarm’s warning sound and quickly respond to it to reduce the
risk of damage, injury, or death that may result from fire. If a household member is hard of hearing, install special
smoke alarms with lights or vibrating devices to alert occupants.
Smoke alarms can sound their alarms only when they detect smoke. Smoke alarms detect combustion particles in
the air. They do not sense heat, flame, or gas. This smoke alarm is designed to give audible warning of a developing
fire. However, many fires are fast-burning, explosive, or intentional. Others are caused by carelessness or safety
hazards. Smoke may not reach the smoke alarm QUICKLY ENOUGH to ensure safe escape.Smoke alarms have
limitations. This smoke alarm is not foolproof and is not warranted to protect lives or property from fire. Smoke
alarms are not a substitute for insurance. Homeowners and renters should insure their lives and property.
In addition, it is possible for the smoke alarm to fail at any time.
For this reason, you must test the smoke alarm weekly and replace every 10years.
