5.
Then place legs into corner braces so holes line up. Using the long bolts, push them through the holes, then add nut and do up finger tight.
6.
Push in plastic feet and tighten all bolts
Page 1: ...s assembly videos Stand Assembly Instructions Small 1m x 0 5m Component Checklist Legs plastic end caps 4 Angle cross braces long 2 Angle cross braces short 2 Cross brace tube 2 Corner brace 4 Long Bo...
Page 2: ...holes flat on ground 2 Place cross brace tubes so the holes line up Select 4 mid size bolts with rounded head Feed bolt upwards so it sticks out the top of the cross brace tube then screw nut on till...
Page 3: ...5 Then place legs into corner braces so holes line up Using the long bolts push them through the holes then add nut and do up finger tight 6 Push in plastic feet and tighten all bolts...
