Assembly
IMPORTANT *****
ENSURE STANDS ARE ON FLAT LEVEL GROUND
If placing the stands on lawn or soft surfaces - Ensure the legs are placed on
footings made from pavers or bricks that are level to prevent the legs sinking into
the earth.
Once filled with soil the Vegepods are quite heavy. So please ensure stand is
secure, stable and flat before filling with soil.
1.
Select the 2 ‘
angle cross braces - long (
that
have 2 holes in the middle of them). Lay them
on the ground with the side with the middle
holes flat on ground.
2.
Place
‘cross brace tubes’
so the holes line up.
Select 4 mid-size bolts with rounded head.
Feed bolt upwards so it sticks out the top of the
cross brace tube, then screw nut on till finger
tight.
3.
Select the 4
corner braces
. Attach
long angle cross braces
to the inside of the
corner
braces
using SHORT bolts. Make sure the longer side of the
corner brace
is pointing
up (you are making this upside down for now)
–
Just finger tight for now.
4.
When you have bolted both the 2 long angle cross braces with holes to the corner
braces then slide the last 2 short angle cross braces in(on top of other cross braces)
and bolt those to the corner braces.
This is what you should have
