VegaStream Vega 50 FXS, Initial Configuration Manual

Page: 34 / 36

Version 0.9 29 November 2004 Page 34 of 36
For use with Vega 50 FXS – SIP version 04.02.05.1 T019 or greater. © 2002-2004 VegaStream Ltd.
12. Archive Vega Configuration
Once configured it is recommended that the configuration is archived to an external server.
To do this check that the tftp address is configured to point to a tftp server (in the
LAN page),
then on the left hand side menu select Advanced , and scroll to the CLI Command section:
in the text entry box type “
PUT tftp:initial_cfg.txt
”. Select .
This will send all the configuration parameters to the tftp server and save them as the file
“
initial_cfg.txt
”. (Note: you may want to choose a unique name rather than
“
initial_cfg.txt
”, especially if you are configuring more than 1 unit).
The Vega configuration can be archived to an ftp server instead of a tftp server by configuring the
ftp server address in the
LAN page and then typing the CLI command
“
PUT FTP:initial_cfg.txt
”. (Again a unique name can be used in place of
“
initial_cfg.txt
”)
If the ftp server requires a login username and password configure the following:
set _advanced.lan.ftp.anonymous_login=0
set _advanced.lan.ftp.username=<ftp username>
set _advanced.lan.ftp._password-<ftp password>