6
2 For your safety
VEGAPULS C 11 • Two-wire 4 … 20 mA
58340-EN-200806
2.5 Modes for worldwide use
Country specific settings for the radar signals are determined via the
operating mode. The operating mode must be set in the operating
menu via the respective adjustment tool at the beginning of the setup
(see chapter "
Setup
" resp. "
Menu overview
".
Caution:
Operating the device without selecting the appropriate country group
constitutes a violation of the regulations of the radio approvals of the
respective country.
Further information can be found in the document "
Regulations for
radar level measuring instruments with radio licenses
" on our home-
page.
2.6 Installation and operation in the USA and
Canada
This information is only valid for USA and Canada. Hence the follow-
ing text is only available in the English language.
Installations in the US shall comply with the relevant requirements of
the National Electrical Code (ANSI/NFPA 70).
Installations in Canada shall comply with the relevant requirements of
the Canadian Electrical Code.