background image

4

1 For your safety

VEGAPULS 69 • 4 … 20 mA/HART - four-wire

47255-EN-140801

1.5  CE conformity

The device fulfills the legal requirements of the applicable EC guide

-

lines. By affixing the CE marking, we confirm successful testing of the 

product.

You can find the CE Certificate of Conformity in the download section 

of our homepage.

1.6  NAMUR recommendations

NAMUR is the automation technology user association in the process 

industry in Germany. The published NAMUR recommendations are 

accepted as the standard in field instrumentation.
The device fulfills the requirements of the following NAMUR recom

-

mendations:

• 

NE 21 – Electromagnetic compatibility of equipment

• 

NE 43 – Signal level for malfunction information from measuring 

transducers

• 

NE 53 – Compatibility of field devices and display/adjustment 

components

• 

NE 107 – Self-monitoring and diagnosis of field devices

For further information see www.namur.de.

1.7  Radio license for Europe

The instrument meets the LPR (Level Probing Radar) radio standard 

EN 302729-1/2.
It is approved for unrestricted use inside and outside of closed ves-

sels in countries of the EU and EFTA that have implemented this 

standard.
For operation outside of closed vessels, the following conditions must 

be fulfilled:

• 

The installation must be carried out by trained qualified personnel

• 

The instrument must be stationary mounted and the antenna 

directed vertically downward

• 

The mounting location must be at least 4 km away from the radio 

astronomy stations, unless special permission was granted by the 

responsible national approval authority

• 

When installed within 4 to 40 km of a radio astronomy station, 

the instrument must not be mounted higher than 15 m above the 

ground.

You can find a list with the respective radio astronomy stations in 

chapter "

Supplement

".

1.8  Environmental instructions

Protection of the environment is one of our most important duties. 

That is why we have introduced an environment management system 

with the goal of continuously improving company environmental pro-

tection. The environment management system is certified according 

to DIN EN ISO 14001.

Summary of Contents for VEGAPULS 69





















Reviews: