14
5 Set up with the display and adjustment module
VEGAPULS 69 • 4 … 20 mA/HART - four-wire
47255-EN-140801
Carry out the following steps in the below sequence.
You can find "
Extended adjustment
" in the next sub-chapter.
1. Measurement loop name
In the first menu item you assign a suitable measurement loop name.
Permitted are names with max. 19 characters.
2. Medium
In this menu item you select the type of bulk solid. The selection com-
prises different granulate sizes.
3. Application/Vessel bottom
In this menu item you specify the application and the form of the ves-
sel bottom.
4. Vessel height/Measuring range
In this menu item you enter the height of the vessel and hence the
active measuring range.
5. Max. adjustment
In this menu item you carry out the max. adjustment.
Enter the measuring distance for 100 % filling.
6. Min. adjustment
In this menu item you carry out the min. adjustment.
Enter the measuring distance for 0 % filling.