43
6 Set up with the display and adjustment module
VEGAPULS 68 • Foundation Fieldbus
36538-EN-170405
When the
[+]
and
[->]
keys are pressed quickly, the edited value,
or the cursor, changes one value or position at a time. If the key is
pressed longer than 1 s, the value or position changes continuously.
When the
[OK]
and
[ESC]
keys are pressed simultaneously for more
than 5 s, the display returns to the main menu. The menu language is
then switched over to "
English
".
Approx. 60 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not confirmed
with
[OK]
will not be saved.
6.3 Measured value indication - Selection of
national language
With the
[->]
key you move between three different indication modes.
In the first view, the selected measured value is displayed in large
digits.
In the second view, the selected measured value and a correspond-
ing bar graph presentation are displayed.
In the third view, the selected measured value as well as a second se-
lectable value, e.g. the temperature of the electronics, are displayed.
During the initial setup of an instrument shipped with factory settings,
use the "
OK
" key to get to the menu "
National language
".
This menu item is used to select the national language for further pa-
rameter adjustment. You can change the selection via the menu item
"
Setup - Display, Menu language
".
With the "
OK
" key you move to the main menu.
6.4 Parameter adjustment
The instrument is adapted to the application conditions via the pa-
rameter adjustment. The parameter adjustment is carried out with an
adjustment menu.
The main menu is divided into five sections with the following func-
tions:
Setup:
Settings, for example, for medium, application, vessel, adjust-
ment, damping
Time functions
Measured value indica-
tion
Selection of national
language
Main menu
